View G121S1-L01_141726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
TFT LCD Preliminary Specification
MODEL NO.: G121S1-L01
Customer: Approved by: Note:
www..com
Liquid Crystal Display Division QRA Division. OA Head Division. Approval Approval
1 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
- CONTENTS REVISION HISTORY 1. GENERAL DESCRIPTION
1.1 OVERVIEW 1.2 FEATURES 1.3 APPLICATION 1.4 GENERAL SPECIFICATIONS 1.5 MECHANICAL SPECIFICATIONS -------------------------------------------------------------------------------------------------------------
3 4
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT 2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE 2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
6
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE 3.2 BACKLIGHT UNIT
-------------------------------------------------------
8
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE 4.2 BACKLIGHT UNIT
-------------------------------------------------------
12
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE 5.2 BACKLIGHT UNIT 5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL 5.4 COLOR DATA INPUT ASSIGNMENT
-------------------------------------------------------
13
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS 6.2 POWER ON/OFF SEQUENCE
www..com
-------------------------------------------------------
15
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS 7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
17
8. PACKAGING
8.1 PACKING SPECIFICATIONS 8.2 PACKING METHOD
-------------------------------------------------------
21
9. DEFINITION OF LABELS 10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS 10.2 SAFETY PRECAUTIONS
-------------------------------------------------------------------------------------------------------------
23 24
11. MECHANICAL CHARACTERISTICS
-------------------------------------------------------
25
2 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
REVISION HISTORY
Version Ver. 0.0 Ver. 1.0 Ver. 1.1 Date Dec., 1 '05 Mar., 14 '06 May, 24 '06 Section Description G121S1-L01 Tentative Specification was first issued G121S1-L01 Preliminary Specification was first issued
www..com
3 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
1. GENERAL DESCRIPTION
1.1 OVERVIEW
The G121S1-L01 model is a 12.1" TFT-LCD module with a 2-CCFL Backlight Unit and a 20-pin 1ch-LVDS interface. This module supports 800 x 600 SVGA mode and displays 262,144 colors. The inverter module for the Backlight Unit is not built in.
1.2 FEATURES
- Wide viewing angle - High contrast ratio - Fast response time - High color saturation - SVGA (800 x 600 pixels) resolution - Wide operating temperature - DE (Data Enable) mode - LVDS (Low Voltage Differential Signaling) interface - RoHS Compliance - Reversible- Scan Function
1.3 APPLICATION
- TFT LCD Monitor - TFT LCD TV - Factory Application - Amusement
www..com
- Vehicle
1.4 GENERAL SPECIFICATI0NS
Item Diagonal Size Active Area Bezel Opening Area Driver Element Pixel Number Pixel Pitch Pixel Arrangement Display Colors Transmissive Mode Surface Treatment Specification (12.1" diagonal) 246.00(H) x 184.50(V) 249.00(H) x 187.50(V) a-si TFT active matrix 800 x R.G.B. x 600 0.3075(H) x 0.3075(V) RGB vertical stripe 262,144 Normally black Hard coating (3H), Anti-glare (Haze 25%) Unit mm mm mm pixel mm color Note (1) -
4 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
1.5 MECHANICAL SPECIFICATIONS
Item Horizontal (H) Module Size Vertical (V) Depth (D) Weight I/F connector mounting position Min. Typ. Max. 260.0 260.5 261.0 203.5 204.0 204.5 11.7 12.2 12.7 660 The mounting inclination of the connector makes the screen center within 0.5mm as the horizontal. Unit mm mm mm g Note (1) (2)
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions. (2) Connector mounting position
+/- 0.5mm
www..com
5 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item Operating Ambient Temperature Storage Temperature Test Item High Temperature Storage Test Low Temperature Storage Test Thermal Shock Storage Test High Temperature Operation Test Low Temperature Operation Test High Temperature & High Humidity Operation Test Heat Cycle Operation Test ESD Test (Operation) Shock (Non-Operating) Vibration (Non-Operating) Symbol TOP TST Value Min. -30 -30 Max. +70 +80 Unit C C Note (0), (1), (2) (0), (1) Note
Test Condition 80C, 240 hours -30C, 240 hours -30C, 0.5hour 80 , 0.5hour; 100cycles, 1hour/cycle 70C, 240 hours -30C, 240 hours 60C, RH 90%, 240hours -30C, 1hour 70C, 1hour; 50cycles, 4hour/cycle 150pF, 330 , 1sec/cycle Condition 1 : panel contact, 8KV Condition 2 : panel non-contact 15KV 220G, 2ms, half sine wave, 1 time for X, Y, Z. 1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
(1) (2)
(2) (2)(3) (2)(3)
Note (0) All test conditions are as above table. Note (1) Temperature and relative humidity range is shown in the figure below. (a) 90 %RH Max. (Ta 40 C).
(b) Wet-bulb temperature should be 39 C Max. (Ta > 40 C). (c) No condensation. Note (2) No display malfunctions. Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
www..com
so that the module would not be twisted or bent by the fixture.
Note (4) Temperature of panel display surface area should be 80 C Max.
6 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
2.2 ELECTRICAL ABSOLUTE RATINGS 2.2.1 TFT LCD MODULE
Item Power Supply Voltage Logic Input Voltage Symbol Vcc VIN Value Min. -0.3 -0.3 Max. 6.0 2.7 Unit V V Note (1)
2.2.2 BACKLIGHT UNIT
Item Lamp Voltage Lamp Current Lamp Frequency Symbol VL IL FL Value Min. 2.0 45 Max. 2.5K 8.5 80 Unit VRMS mARMS KHz Note (1), (2), IL = 8mA (1), (2)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Function operation should be restricted to the conditions described under Normal Operating Conditions. Note (2) Specified values are for lamp (Refer to 3.2 for further information).
www..com
7 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
Parameter Power Supply Voltage Ripple Voltage Rush Current White Black LVDS differential input voltage LVDS common input voltage Power Supply Current function. Note (2) Measurement Conditions: Symbol Vcc VRP IRUSH Vid Vic -100 1.2 Min. 3.0 Value Typ. 3.3 / 5.0 Max. 5.5 100 (1) Ta = 25 2 C Unit V mV A mA mA mV V Note (2) (3)a (3)b
800 440 +100
Note (1) The module is recommended to operate within specification ranges listed above for normal
+3.3/+5.0V Q1 2SK1475 Vcc C3 FUSE R1 47K 1uF (LCD Module Input)
(High to Low) (Control Signal) R2 SW 1K +12V
Q2 2SK1470
VR1 C1
47K
C2
0.01uF 1uF
www..com
Vcc rising time is 470s
+3.3/+5.0V
0.9Vcc 0.1Vcc
GND 470s
8 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
Note (3) The specified power supply current is under the conditions at Vcc = 5.0 V, Ta = 25 2 C, fv = 60 Hz, whereas a power dissipation check pattern below is displayed. a. White Pattern b. Black Pattern
Active Area
Active Area
www..com
9 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
3.2 BACKLIGHT UNIT
Parameter Lamp Input Voltage Lamp Current Lamp Turn On Voltage Operating Frequency Lamp Life Time Power Consumption Symbol VL IL VS FL LBL PL Min. 450 2.0 --45 50000 -Value Typ. 500 8.0 ----4.0 Max. 550 8.5 1010 1200 80 --Unit VRMS mARMS VRMS VRMS KHz Hrs W Note IL =8mA (1) 25 C, (2) 0 C, (2) (3) (5), IL =8mA (4), IL =8mA
Note (1) Lamp current is measured by utilizing high-frequency current meters as shown below: HV (Pink) LV (White)
1 2
A A
LCD Module
Inverter
HV (Pink) LV (White) 1 2 A Ta = 25 2 C
Current Meter YOKOGAWA 2016
Note (2) The voltage shown above should be applied to the lamp for more than 1 second after startup. Otherwise, the lamp may not be turned on normally. Note (3) The lamp frequency may produce interference with horizontal synchronization frequency from the display, which might cause line flow on the display. In order to avoid interference, the lamp frequency should be detached from the horizontal synchronization frequency and its harmonics as far as possible. Note (4) PL = IL VL Note (5) The lifetime of lamp can be defined as the time in which it continues to operate under the
www..com
condition Ta = 25
2 oC and IL = 2.0 ~ 8.0 mArms until one of the following events occurs:
(a) When the brightness becomes or lower than 50% of its original value. (b) When the effective ignition length becomes or lowers than 80% of its original value. (Effective ignition length is defined as an area that has less than 70% brightness compared to the brightness in the center point.) Note (6) The waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. The performance of the Backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. When designing or ordering the inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument.
10 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
The output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform. (Unsymmetrical ratio is less than 10%) Please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. Lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. Therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference.
Requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. It shall help increase the lamp lifetime and reduce its leakage current. a. The asymmetry rate of the inverter waveform should be 10% below; b. The distortion rate of the waveform should be within 2 10%;
c. The ideal sine wave form shall be symmetric in positive and negative polarities. * Asymmetry rate:
Ip
| I p - I -p | / Irms * 100%
I -p
* Distortion rate I p (or I -p) / Irms
www..com
11 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
RX0(+/-) RX1(+/-) RX2(+/-) RXC(+/-) U/D L/R Vcc GND
SCAN DRIVER IC
LVDS INPUT / TIMING CONTROLLER
TFT LCD PANEL (800x R.G.B.x600)
INPUT CONNECTOR (JAE-FI-SEB20P-HFE)
DATA DRIVER IC DC/DC CONVERTER & REFERENCE VOLTAGE
VL
LAMP CONNECTOR (JST BHR-03VS-1)
BACKLIGHT UNIT
4.2 BACKLIGHT UNIT
1 HV(Pink) 2 LV(White)
www..com
1 HV(Pink) 2 LV(White)
12 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Name VCC_IN VCC_IN GND GND RX0RX0+ GND RX1RX1+ GND RX2RX2+ GND CLKCLK+ GND L/R U/D GND GND Description Power Supply (5.0 V / 3.3 V ) Power Supply (5.0 V / 3.3 V ) Ground Ground Differential Data Input, CH0 (Negative ) Differential Data Input, CH0 ( Positive ) Ground Differential Data Input, CH1 ( Negative ) Differential Data Input , CH1 ( Positive ) Ground Differential Data Input , CH2 ( Negative ) Differential Data Input , CH2 ( Positive ) Ground Differential Clock Input ( Negative ) Differential Clock Input ( Positive ) Ground Horizontal Display Mode Select Signal Vertical Display Mode Select Signal Ground Ground Remark
R0 ~ R5, G0
G1 ~ G5, B0, B1
B2 ~ B5, DE
LVDS Level Clock
Note (5) Note (5)
Note (1) Connector Part No.: JAE-FI-SEB20P-HFE or equivalent. Note (2) Mating Connector Part No.: JAE-FI-SE20M, FI-S20S or equivalent. Note (3) The first pixel is odd. Note (4) Input signal of even and odd clock should be the same timing. Note (5) L/R=High, U/D=Low
www..com
L/R=Low, U/D=Low
R/L=High, U/D=High
R/L=Low, U/D=High
13 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
5.2 BACKLIGHT UNIT
Pin 1 2 3 Symbol HV NA LV Description High Voltage NA Low Voltage Remark Pink White
Note (1) Connector Part No.: JST BHR-03VS-1 or equivalent Note (2) User's connector Part No.: JST SM03(4.0)B-BHS-1-TB or equivalent
5.3 COLOR DATA INPUT ASSIGNMENT
The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the color. The higher the binary input, the brighter the color. The table below provides the assignment of color versus data input. Data Signal Red Green Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Colors Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Red(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Gray Red(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 Scale : : : : : : : : : : : : : : : : : : : : : : : : Of : : : : : : : : : : : : : : 0 0 0 0 0 Red Red(61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 Red(62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 Red(63) 1 1 1 1 1 1 0 0 0 0 0 0 0 www..com 0 0 0 0 0 Green(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Green(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 Gray Green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 : : : : : Scale : : : : : : : : : : : : : : : : : : : Of : : : : : : : : : : : : : : Green Green(61) 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 Green(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 Green(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 Blue(0)/Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 Gray Blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 Scale : : : : : : : : : : : : : : : : : : : Of : : : : : : : : : : : : : : : : : : : Blue Blue(61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 Blue(62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 Blue(63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 Color Note (1) 0: Low Level Voltage, 1: High Level Voltage
14 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
The input signal timing specifications are shown as the following table and timing diagram. Item Symbol Min. Typ. Max. Unit Note Frequency Fc 33.4 39.7 48.3 MHz LVDS Clock Period Tc 20.7 25.1 29.9 ns Frame Rate Fr 56 60 75 Hz Tv=Tvd+Tvb Total Tv 606 628 650 Th Vertical Active Display Term Display Tvd 600 600 600 Th Blank Tvb Tv-Tvd 28 Tv-Tvd Th Total Th 920 1056 1240 Tc Th=Thd+Thb Horizontal Active Display Term Display Thd 800 800 800 Tc Blank Thb Th-Thd 256 Th-Thd Tc Note (1) Because this module is operated by DE only mode, Hsync and Vsync input signals should be set to low logic level or ground. Otherwise, this module would operate abnormally. Signal
INPUT SIGNAL TIMING DIAGRAM
www..com
15 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
6.2 POWER ON/OFF SEQUENCE
To prevent a latch-up or DC operation of LCD module, the power on/off sequence should follow the conditions shown in the following diagram.
Power Supply VCC
0V 0.5msT110ms 0T250ms 0T350ms 500msT4
0.9 VCC 0.1VCC
0.9 VCC 0.1VDD
T1
T3
T2
T4
Signals
0V
VALID
Power On
Power Off
Backlight (Recommended)
200msT5 200msT6 T5
50%
50%
T6
Power ON/OFF Sequence
www..com
Note (1) Please avoid floating state of interface signal at invalid period. Note (2) When the interface signal is invalid, be sure to pull down the power supply of LCD Vcc to 0 V. Note (3) The Backlight inverter power must be turned on after the power supply for the logic and the interface signal is valid. The Backlight inverter power must be turned off before the power supply for the logic and the interface signal is invalid.
16 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
Item Ambient Temperature Ambient Humidity Supply Voltage Input Signal Inverter Current Inverter Driving Frequency Inverter Symbol Value Unit o Ta C 252 Ha %RH 5010 VCC 5.0 V According to typical value in "3. ELECTRICAL CHARACTERISTICS" IL 8.0 mA FL 61 KHz Sumida H05-5052
7.2 OPTICAL SPECIFICATIONS
The relative measurement methods of optical characteristics are shown in 7.2. The following items should be measured under the test conditions described in 7.1 and stable environment shown in Note (5).
Item Symbol Condition Min. Typ. Max. Unit Note
Red Color Chromaticity Green Blue White Center Luminance of White Contrast Ratio Response Time White Variation Horizontal Viewing Angle
www..com
Vertical
Rx Ry Gx Gy Bx By Wx Wy LC CR TR TF W x+ xY+ Y-
x=0, Y =0 CS-1000
x=0, Y =0 x=0, Y =0 CR10
(0.621) (0.347) (0.310) (0.545) Typ + Typ 0.03 (0.146) 0.03 (0.111) (0.313) (0.329) (380) (450) --(700) (1000) ----(13) (18) --(12) (17) --(1.25) (1.4) (80) (89) (80) (89) (80) (89) (80) (89)
cd/m2 ms ms Deg.
(1), (5)
(4), (5) (2), (5) (3) (5), (6) (1), (5)
17 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
Note (1) Definition of Viewing Angle (x, y): Normal x = y = 0 yX- = 90 xx- x+ y+ 12 o'clock direction y+ y+ = 90
6 o'clock y- = 90
y-
x+
X+ = 90
Note (2) Definition of Contrast Ratio (CR): The contrast ratio can be calculated by the following expression. Contrast Ratio (CR) = L63 / L0 L63: Luminance of gray level 63 L 0: Luminance of gray level 0 CR = CR (5) CR (X) is corresponding to the Contrast Ratio of the point X at Figure in Note (6).
www..com
Note (3) Definition of Response Time (TR, TF) and measurement method:
Gray Level 63
100% 90%
Gray Level 63
Optical Response Gray Level 0
10% 0%
Time TF TR
66.67 ms
66.67 ms
18 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
Note (4) Definition of Luminance of White (LC): Measure the luminance of gray level 63 at center point LC = L (5) L (x) is corresponding to the luminance of the point X at Figure in Note (6).
Note (5) Measurement Setup: The LCD module should be stabilized at given temperature for 20 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 20 minutes in a windless room.
LCD Module LCD Panel Center of the Screen BM-5A CS-1000
Field of View = 2
Light Shield Room
500 mm
(Ambient Luminance < 2 lux)
www..com
19 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
Note (6) Definition of White Variation (W): Measure the luminance of gray level 63 at 5 points W = Maximum [L (1), L (2), L (3), L (4), L (5)] Minimum [L (1), L (2), L (3), L (4), L (5)]
Horizontal Line D
D/4 D/2 3D/4
Vertical Line
W/4
1
2 X
W
W/2
5
: Test Point X=1 to 5
3W/
3
4
Active Area
www..com
20 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
8. PACKAGING
8.1 PACKING SPECIFICATIONS
(1) 15pcs LCD modules / 1 Box (2) Box dimensions: 461 (L) X 362 (W) X 314 (H) mm (3) Weight: approximately 11.15Kg (15pcs modules per box)
8.2 PACKING METHOD
(1) Carton Packing should have no failure in the following reliability test items. Test Item Test Conditions ISTA STANDARD Random, Frequency Range: 1 - 200 Hz Top & Bottom: 30 minutes (+Z), 10 min (-Z), Right & Left: 10 minutes (X) Back & Forth 10 minutes (Y) 1 Angle, 3 Edge, 6 Face, 61 cm Note
Vibration
Non Operation
Dropping Test
Non Operation
www..com
Figure. 8-1 Packing method
21 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
www..com
Figure. 8-2 Packing method
22 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
The barcode nameplate is pasted on each module as illustration, and its definitions are as following explanation.
(a) Model Name: G121S1-L01 (b) Revision: Rev. XX, for example: A0, A1... B1, B2... or C1, C2...etc. (c) CMO barcode definition: Serial ID: XX-XX-X-XX-YMD-L-NNNN Code XX XX X YMD L NNNN
www..com
Meaning CMO internal use Revision CMO internal use Year, month, day
Product line # Serial number
Description Cover all the change Year: 2001=1, 2002=2, 2003=3, 2004=4... Month: 1~12=1, 2, 3, ~, 9, A, B, C Day: 1~31=1, 2, 3, ~, 9, A, B, C, ~, W, X, Y, exclude I, O, U. Line 1=1, Line 2=2, Line 3=3, ...etc. Manufacturing sequence of product
23 / 25
Version 1.1
Issued Date: May. 2, 2006 Model No.: G121S1-L01
Preliminary
10. PRECAUTIONS
10.1 ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly. (2) To assemble or install module into user's system can be only in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) It's not permitted to have pressure or impulse on the module because the LCD panel and Backlight will be damaged. (4) Always follow the correct power sequence when LCD module is connecting and operating. This can prevent damage to the CMOS LSI chips during latch-up. (5) Do not pull the I/F connector in or out while the module is operating. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) It is dangerous that moisture come into or contacted the LCD module, because moisture may damage LCD module when it is operating. (9) High temperature or humidity may reduce the performance of module. Please store LCD module within the specified storage conditions. (10) When ambient temperature is lower than 10C may reduce the display quality. For example, the response time will become slowly, and the starting voltage of CCFL will be higher than room temperature.
10.2 SAFETY PRECAUTIONS
(1) The startup voltage of Backlight is approximately 1000 Volts. It may cause electrical shock while
www..com
assembling with inverter. Do not disassemble the module or insert anything into the Backlight unit.
(2) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) After the module's end of life, it is not harmful in case of normal operation and storage.
24 / 25
Version 1.1

▲Up To Search▲

Price & Availability of G121S1-L01

	To Download G121S1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .